Features:
- PC Interface for use with ABMS-4 Battery Management System Software
- Compatible with RF80-K and U-60 charger/analyzers
- Designed for nickel-cadmium and lead-acid batteries
- Automatically scans nickel-cadmium batteries, acquiring real-time cell data
- Display shows all cell voltages, battery current/voltage, and faults
- Cells with faults flash on/off
- Print button to print out display at any time or reprint last report
- Self-Calibration to ensure continued accuracy
- Documents initial, intermediate, and ending voltages for every cell
- Documents elapsed charge or discharge time, and ampere-hours
- Documents charge or discharge history at regular intervals
- Graphs battery voltage for charge/discharge
- Visual and audible warnings for fault conditions
- Quick-connect cell probes and wiring harness support arm for easy use
- Mounts on or under shop shelf
Size:
8" (20.3cm) wide × 9" (22.9 cm) deep × 4.3 " (10.8 cm) high
Net weight:
7 pounds (3.2 kg), inclusive of harness
|
|
Input Power
90 to 135 or 200-265 VAC
Frequency:
50 to 60 Hertz
Current Requirements:
0.03A, typical
Power Switch:
Opens both sides of line
Display :
4x40-character
Serial Printer :
Dedicated RS232 port
Serial Printer Kit 115v p/n 121470-001
Serial Printer Kit 230v p/n 121470-002
Computer:
Dedicated RS232 port
Cell probes:
Spring loaded, quick connect
Current sensor:
In-Line Current Shunt
|
